how to remove lexus rx 350 roof rack

how to remove lexus rx 350 roof rack

Removing a Lexus RX 350 Roof Rack can be a tricky task if you don’t know what you are doing. Fortunately, we have put together a detailed guide to help you through the process. First, locate and unscrew the four mounting bolts at the front of your roof rack rails. Then, carefully lift the roof rack off from both sides using two people for better control and leverage. After this, locate and remove the four rubber covers at each corner of your roof rack rails – these should be easily removable with minimum effort. Finally, unscrew and remove all remaining hardware that was used to attach your roof rack to your Lexus RX 350 – this will involve undoing several different screws in order to release it completely from your vehicle. With some patience and careful consideration, removing a Lexus RX 350 Roof Rack is entirely possible!

Having a roof rack on your Lexus RX 350 can be great for transporting large objects or to use while on an outdoor excursion, but what do you do when it’s time to remove it? Removing the roof rack from your Lexus RX 350 is not difficult, as long as you have the right tools and know what steps to take. This article will provide comprehensive instructions on how to properly remove a Lexus RX 350 roof rack and store it until you need it again.

First and foremost, make sure that all items have been removed from the roof rack before attempting to take it down. Gather any necessary tools such as a socket wrench or ratchet set and then locate the two mounting screws located in front of the rear window near each side of the vehicle. Unscrew these bolts one at a time until both are loose enough for removal.

Tools Needed

Removing your Lexus RX 350 roof rack is a straightforward task that requires only a few basic tools. If you plan on taking the rack off yourself, it’s important to make sure you have all the necessary items before you begin. Having all the right equipment will make the job much easier and faster.

The first tool you’ll need is a socket wrench with an appropriate size socket head for removing bolts. You’ll also need some needle-nose pliers for gripping smaller nuts and bolts during removal, as well as a screwdriver for any screws that need to be taken out. Additionally, if there are any electrical connections involved, it would be wise to have some electrical tape handy in case of any fraying wires. Finally, remember to wear work gloves throughout the process so that your hands stay safe from sharp edges or other potential hazards.

For many Lexus RX 350 owners, a roof rack provides an excellent way to store and transport items that wouldn’t otherwise fit in the vehicle. However, there are some potential hazards associated with having a roof rack installed on your car. It’s important to understand the risks before you attach anything to the roof of your vehicle.

The primary safety concern when using a roof rack is that it can increase wind resistance, which can make your vehicle more difficult to handle at high speeds or in strong winds. Additionally, having too much weight on the roof can affect your car’s center of gravity and cause it to be less stable while driving. This could lead to decreased handling ability and greater risk of rollover if you take sharp turns or sudden maneuvers.

Step 1: Loosening Bolts

Loosening bolts can be a tricky and frustrating process, but it doesn’t have to be. For those wanting to remove their Lexus RX 350 Roof Rack, there is an easy way to ensure that the job is done right. By following these simple steps, anyone will be able to loosen the bolts and safely remove the roof rack with ease.

The first step in loosening the bolts on your Lexus RX 350 Roof Rack is to gather all of the necessary tools needed for this project. You’ll need a ratchet set, a box wrench, some lubricant (WD-40 or other penetrating oil), and a hammer. With all of these tools in hand, you’re ready to begin removing the roof rack from your vehicle.

Step 2: Uninstalling Cross Bars

Cross bars are an integral part of a Lexus RX 350’s roof rack system, providing additional carrying capacity for the vehicle. However, when it is time to uninstall them, the process can be daunting if you don’t know what you’re doing. This article will show you exactly how to remove your Lexus RX 350’s cross bars safely and correctly so that your car can look its best again.

Removing the cross bars isn’t difficult and shouldn’t take more than 20 minutes of your time once you have all the right tools. To begin, find the end cap on each side of the cross bar and unscrew them both with an Allen wrench or Phillips head screwdriver. Once these are removed, slide out each end cap along with the roof rack feet and lower them down onto a soft cloth or towel on a flat surface to prevent damage to any components.

how to remove lexus rx 350 roof rack

Step 3: Removing End Caps

Removing End Caps from Lexus RX 350 Roof Rack

Are you looking to remove end caps from your Lexus RX 350 roof rack? Whether you need to replace the end caps, upgrade them for added style, or just want to remove them for a different look, it’s easy and doable with the right tips. Removing the end caps on your Lexus RX 350 roof rack is a relatively simple process that can be done without damaging the car or its components. Here are some guidelines to help you get started!

Begin by removing the screws holding in each of the four corner brackets of your roof rack. These screws (four per bracket) are located at each corner where your roof rack meets the car body. After unscrewing these screws, gently pull up on each bracket until they come off and set aside.

Step 4: Reinstalling Parts

The fourth step in the process of removing a Lexus RX 350 roof rack is to reinstall any components that were removed during the disassembly process. It’s important for all the pieces to be properly reattached and tightened securely, or else it may cause damage to both the vehicle and its occupants. Start by realigning any brackets that were disconnected and then tighten them back into place with a wrench.

Next, if there are any bolts that need to be replaced, make sure they are installed correctly according to their size. To ensure safety, use an appropriate torque wrench when tightening these bolts as they can easily become over-tightened and strip easily if not done properly. Once everything has been put back together, take the time to double check all your work before hitting the road.


Removing a Lexus Rx 350 roof rack may seem like an intimidating task, but with the right tools and steps it can be done quickly and safely. Removal requires some basic hand tools as well as step-by-step instructions to ensure the job is completed correctly. After removing the nuts and bolts that secure the roof rack to the car, it’s important to inspect the area for any signs of damage before reinstalling. By following these steps, you can easily remove the Lexus Rx 350 roof rack without damaging your car or yourself in any way. The entire process should take no more than an hour once you have all of your supplies ready. Following these simple steps will help ensure a safe and successful removal of your Lexus Rx 350 Roof Rack.

Be the first to comment

Leave a Reply

Your email address will not be published.